Brother DCP4020C User Manual

Quick Setup GuideDCP-4020CBefore you can use the DCP, you must set up the hardware and install the driver.To help you get started in setting up the ma

8Installing the Driver & SoftwareYou can find a variety of information on the CD-ROM.Install SoftwareYou can install printer, scanner drivers and

9Setting Up the DCPWindows® Mac® OS8.6-9.2Mac® OS X 10.1/10.2.1 or greaterInstalling the Driver & SoftwareFollow the instructions on this page for

10Installing the Driver & SoftwareMake sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7.If you are u

116Click MFL-Pro Suite in Main Application.7Click Install.8When the PaperPort® 8.0 SE Setup window is displayed, click Next.9After reading and accepti

12Installing the Driver & SoftwareBWhen the Registration screen is displayed, make your selection and follow the on screen instructions.CClick Fin

13Make sure that you followed the instructions in 1 to F on pages 10 to 12.GWhen this screen appears, connect the USB interface to your PC, and then c

14Installing the Driver & SoftwareMClick Finish to restart your computer.NAfter the computer restarts, click Yes to have the Control Center loaded

15Make sure that you followed the instructions in 1 to F on pages 10 to 12.GWhen this screen appears, connect the USB interface to your PC, and then c

16Installing the Driver & SoftwareMake sure that you followed the instructions in 1 to F on pages 10 to 12.GWhen this screen appears, connect the

171Insert the supplied CD-ROM into your CD-ROM drive.2The CD-ROM main menu will appear.Click Install Software.3Click PhotoPrinter® 4 in the Optional A

Carton components may differ from one country to another.Save all packing materials and the carton.Carton ComponentsQuick Setup GuideCD-ROMUser’s Guid

18Installing the Driver & SoftwareMake sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7.1Unplug the

199Click the MFL-Pro Color icon you installed. On the right side of the Chooser, select the printer to which you want to print. Close the Chooser.The

20Installing the Driver & SoftwareMake sure that you have completed the instructions from Step 1 “Setting Up the DCP” on pages 2 to 7.1Unplug the

210Open the Print Center icon.AClick Add Printer...BSelect USB.CSelect DCP-4020C, and then click Add.DSelect Quit Print Center from the Print Center

TrademarksThe Brother logo is a registered trademark of Brother Industries, Ltd.Brother is a registered trademark of Brother Industries, Ltd.PhotoCapt

UK

1Table of ContentsSetting Up the DCP1. Removing the Protective Parts...22. Attac

2Setting Up the DCP1Remove the protective tape.Do NOT connect the USB cable. Connecting the USB cable is done when installing the driver.1Pull the sca

3Setting Up the DCPWindows® Mac® OS8.6-9.2Mac® OS X 10.1/10.2.1 or greater1Fan the stack of paper well to avoid paper jams and misfeeds.2Unfold the pa

4Setting Up the DCP1Make sure that the power is turned on. The LCD shows:2Pull the scanner cover release lever to open the scanner cover and lift it t

5Setting Up the DCPWindows® Mac® OS8.6-9.2Mac® OS X 10.1/10.2.1 or greater• DO NOT shake the ink cartridges. If ink stains your body or clothing, wash

6Setting Up the DCPStep A: Colour Block Quality Check1The LCD shows:Check the quality of the four colour blocks formed by the short lines printed on t

7Setting Up the DCPWindows® Mac® OS8.6-9.2Mac® OS X 10.1/10.2.1 or greaterYou can adjust the LCD contrast for a sharper and more vivid display. If you