Brother DCP-117C User Manual download pdf (Page 12)

10

Installing the Driver & Software

Make sure that you have completed the instructions from Step 1 “Setting Up

the Machine” on pages 2 - 6.

1

Disconnect the machine from the power

socket and from the Macintosh

®

, if you have

already connected an interface cable.

2

Turn on your Macintosh

®

.

3

Insert the supplied CD-ROM into your

CD-ROM drive.

4

Double-click the Start Here icon to install

the printer and scanner drivers. If the

language screen appears, select your

language.

5

Click MFL-Pro Suite to install.

6

Follow the on-screen instructions, and

restart your Macintosh

®

.

7

Connect the USB interface cable to your

Macintosh

®

, and then connect it to the

machine.

To connect the USB cable to the machine:

1. Open the scanner cover to its open

position.

2. Connect the USB cable into the USB

socket, marked with a symbol. You

will find the USB socket above and to the

left of the ink cartridge slots, as shown

below.

3. Carefully guide the USB cable into the

trench as shown below, following the

trench round and toward the back of the

machine.

DO NOT connect the machine to a

USB port on a keyboard or a non

powered USB hub.

8

Turn on the machine by plugging in the

power cord.

9

From the Apple

®

menu, open the Chooser.

0

Click the Brother Ink icon you installed. On

the right side of the Chooser, select the

printer to which you want to print.

Close the Chooser.

The Brother Printer driver and Scanner

driver have been installed.

A

To install Presto!

®

PageManager

®

, click the

Presto! PageManager icon and follow the

on-screen instructions.

Presto!

®

PageManager

®

has been

installed and the installation is now

complete.

For Mac OS

®

9.1 to 9.2

You can easily scan, share and organize

photos and documents using Presto!

®

PageManager

®

.

Step 2

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments