Brother DCP-9045CDN User Manual download pdf (Page 26)

Chapter 2

12

Handling and using special

paper 2

The machine is designed to work well with

most types of xerographic and bond paper.

However, some paper variables may have an

effect on print quality or handling reliability.

Always test samples of paper before

purchasing to ensure desirable performance.

Store paper in its original packaging and keep

it sealed. Keep the paper flat and away from

moisture, direct sunlight and heat.

Some important guidelines when selecting

paper are:

 Your supplier should be informed that the

paper or envelopes will be used in a color

laser machine.

 Preprinted paper must use inks that can

withstand the temperature of the

machine’s fusing process (392 degrees

Fahrenheit or 200 degrees centigrade for

a period of 0.1 seconds).

 If you have selected a cotton bond paper,

paper having a rough surface, such as

cockle or laid finished paper or paper that

is wrinkled or puckered, the paper may

exhibit degraded performance.

Types of paper to avoid 2

CAUTION

Some types of paper may not perform well

or may cause damage to your machine.

DO NOT use paper:

• that is highly textured

• that is extremely smooth or shiny

• that is curled or warped

1 0.08 in. (2 mm) or greater

• that is coated or has a chemical finish

• that is damaged, creased or folded

• that exceeds the recommended weight

specification in this guide

• with tabs and staples

• with letterheads using low temperature

dyes or thermography

• that is multipart or carbonless

• that is designed for inkjet printing

If you use any of the types of paper listed

above, they may damage your machine.

This damage is not covered under any

Brother warranty or service agreement.

1

1

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 191 192

Comments to this Manuals

No comments