Brother MFC 8890DW User Manual download pdf (Page 5)

5

4

Release the scanner lock

a Push the lever a in the direction shown to

unlock the scanner.

(The gray scanner lock lever is located at the

back left side, under the document cover b.)

5

Connect the power cord

and telephone line

a Make sure that the machine power switch is off.

Connect the AC power cord to the machine.

b Plug the AC power cord into an AC outlet. Turn

the power switch on.

c Connect the telephone line cord. Connect one

end of the telephone line cord to the jack on the

machine marked LINE and the other end to a

modular wall jack.

WARNING

The machine must be grounded using a

3-prong plug.

Since the machine is grounded through the

power outlet, you can protect yourself from

potentially hazardous electrical conditions on

the telephone network by keeping the power

cord connected to your machine when you

connect it to a telephone line. Similarly, you

can protect yourself when you want to move

your machine by disconnecting the telephone

line first and then the power cord.

IMPORTANT

DO NOT connect the interface cable yet.

Note

If Scanner Locked appears on the LCD,

immediately release the scanner lock and press

Stop/Exit. (See Release the scanner

lock on page 5.)

2

1

IMPORTANT

The telephone line cord MUST be connected

to the jack on the machine marked LINE.

1 2 3 4 5 6 7 8 9 10 ... 45 46

Comments to this Manuals

No comments