Brother MFC-7450 User's Guide Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 199
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
Network Scanning (For models with built-in network)
84
4
Scan to File 4
When you choose Scan to File, you can scan a black and white or colour document and send it directly to a
PC you designate on your network. The file will be saved in the folder and file format that you have configured
in ControlCenter3. You can change the Scan configuration. (See File on page 62.)
a Put the document face up in the ADF, or face down on the scanner glass.
b Press (Scan).
c Press a or b to choose Scan to File.
Press OK.
d Press a or b to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
e Press Start.
The machine starts the scanning process.
Note
If you want the scanned data in colour, choose colour in scan type on the Device Button tab of the
ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in
scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN on page 57.)
If you would like to change the file name of scanned documents, enter the file name in File Name section
on the Device Button tab of the ControlCenter3 configuration. To change the machine’s Scan key
settings, right-click each Control Center button, click ControlCenter Configuration and click the
Device Button tab.
Scan to FTP (MFC-7840W, MFC-7840N and MFC-7440N) 4
When you choose Scan to FTP, you can scan a black and white or colour document directly to an FTP server
on your local network or on the internet.
The details required to use Scan to FTP can be entered manually at the control panel or by using Web Based
Management to pre-configure and store the details in an FTP Profile.
For information on how to manually enter the Scan to FTP details, see Scan to FTP Manual Method
on page 88. To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser, and then you can configure or change the settings in the
Administrator Settings. You can configure up to ten FTP server profiles.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 198 199

Comments to this Manuals

No comments