Brother MFC-8810DW Setup Guide download pdf (Page 7)

7

5

Wireless setup

(if needed)

a When the Wi-Fi setup message appears, press

OK.

Do one of the following:

 If you are using a Macintosh computer or a

mobile device on a wireless network, go to

b.

 If you are using a Windows

®

computer or

want to connect your Macintosh using USB

or wired network, go to c.

Setup Wi-Fi?

a Yes

b No

Select ab or OK

b Press a or b to choose Yes.

Press OK.

Then go to step 19 on page 25 to continue the

wireless setup.

After finishing the wireless setup you will need

to return to step 6 to finish the machine setup.

c Press a or b to choose No.

Press OK.

Then go to step 6.

The wireless setup for Windows

®

users will be

covered in later steps.

Note

If you are sharing one telephone line with an

external telephone answering machine, connect it

as shown below.

Before you connect the external telephone

answering machine, remove the protective cap c

from the EXT. jack on the machine.

a Extension telephone answering machine

(not supported)

b External telephone answering machine

c Protective cap

Set the receive mode to External TAD if

you have an external answering machine.

See Choose the correct Receive

Mode on page 9. For additional details, see

Connecting an external TAD (telephone

answering device) in the Basic User's Guide.

Note

If you want to change the initial settings on your

machine first, you can choose No and you will be

able to configure the wireless settings later.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Comments to this Manuals

No comments