Brother AX-325 User Manual download pdf (Page 11)

Replacing the correction tape

Two types of correction tape are available:

• Lift-off correction tape, to be used correctabie

film ribbon.

• Cover-up correction tape, to be used nylon nbbon.

To replace the correction tape:

1) Use [SPACE BAR] or |en to move the carrier to the

centre of the platen.

2) Open the top cover.

3) Remove the cassette ribbon, if installed.

4) Pull off both spools, pressing against the correction

tape with your thumbs. Bring it back to a position

parallel with the platen, and lift It up and out.

5) Pass the new tape through the left guide, behind the

ribbon guide, and out through the right guide. The

rough (sticky) side of the tape should face the platen.

6) Attach the feeder spool to the pin on the left.

7) Attach the take-up spool to the pm on the right.

8) Turn the take-up spool counter-clockwise until a small

amount of white tape has wound around it.

9) Replace the cassette ribbon and close the top cover.

10) Press ]^ + // to move the carrier to the previous

position.

-Page 11-

1 2 ... 6 7 8 9 10 11 12 13 14

No comments

Brother AX-325 User Manual Page 11