Brother DCP-1400 Setup Guide download pdf

A. Unpack the drum unit assembly, including the toner

cartridge, and gently rock it from side to side five

or six times to distribute the toner evenly inside the

cartridge.

To prevent damage to the drum, do not expose it to

light for longer than a few minutes.

If You Have the

Optional Paper

Cassette #2,

Connect it

A. Carefully pick up the machine and

place it on top of Paper Cassette

#2.

B. Plug the modular cable from

Cassette #2 into the modular jack

on the Brother machine.

To select which cassette will be

used for printing, see Chapter 4 in

Owner’s Manual in CD-ROM.

If you move the machine after

connecting Cassette #2, be sure to

carefully lift Cassette #2 with the

machine because they are not

attached.

Packing List

Make sure you have the following items:

THANK YOU!

CONGRATULATIONS ON PURCHASING THE ULTIMATE BROTHER

MACHINE. WE ARE SURE YOU WILL BE THRILLED WITH THE

CONVENIENT WAY YOUR NEW MACHINE PERFORMS SO MANY

TASKS WITH DAZZLING RESULTS!

Follow these simple instructions in numerical order.

If you cannot solve a problem:

Refer to Frequently Asked Questions (FAQs) on Brother World

Wide Web;

URL: http://solutions.brother.com

Call Brother Customer Service at;

USA: 1-800-284-4329 (9AM-5PM EST)

1-800-284-3238

(TTY service for the hearing impaired)

In Canada: 1-877-BROTHER (8AM-8PM EST)

1-514-685-6464 (in Montreal)

Some illustrations are based on DCP-1400.

Keep the packing materials for possible future transport. If you do not pack the machine properly, you may

void your warranty.

Paper Cassette

Owner’s Manual

Warranty

Registration

CD-ROM

Bi-directional

Parallel Cable

Drum Unit Assembly

(With free

Standard

Toner Cartridge – up

to 3,000 pages)

Power Cord

Software License

Agreement

Quick Setup

Guide

Accessory

Order Form

Cable Tie

Filter Core

For USB Cable

Install the Drum Unit

Power Cord

Install Power Cord

DCP-1400

Quick Setup Guide

Load Paper

Maximum Paper Height Guide

– 1 –

Release the Scanner

Lock

Push the lever up to unlock the scanner. (The blue

Scanner Lock Lever is on the back left under side of the

scanner cover.)

If CHECK SCAN LOCK appears on the LCD,

immediately release the scanner lock and press Stop.

Lock Unlock

Scanner Lock Lever

B. Remove the protective part.

C. Open the front cover of the machine.

D. Insert the drum unit assembly into the machine.

E. Close the front cover.

A. Pull the paper cassette completely out of the machine.

B. Slide the paper width and length adjusters of paper cassette for

the paper size you want.

C. Load paper in the paper cassette. Press down the paper to flatten

in all four corners, keeping the paper level below the guide.

D. Slide the paper cassette into the machine until it locks into place.

Turn the Power Switch OFF.

Do Not connect the Parallel or USB Cable.

version A

1 2 3 4

Summary of Contents

Page 1 - Quick Setup Guide

A. Unpack the drum unit assembly, including the tonercartridge, and gently rock it from side to side fiveor six times to distribute the toner evenly i

Page 2 - 95/98/98SE/Me/2000 Users

For Windows® 95/98/98SE/Me/2000 UsersSetting Up the DCP and PC to Work TogetherBefore You begin• You must set up the hardware and install the driver b

Page 3

( For Windows® 2000 Professional User )For Parallel interface cable usersStep 4.Connect the DCP to your PC with Parallel Cable.A. Connect the parallel

Page 4 - Macintosh

Install SoftwareYou can install printer, scanner drivers and the various utility items,including PaperPort® and TextBridge® OCR.On-Line RegistrationYo