Brother DCP-150C User's Guide Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 99
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
Troubleshooting and Routine Maintenance
59
B
No Cartridge An ink cartridge is not installed
properly.
Take out the ink cartridge and put it in again
seating it properly. (See Replacing the ink
cartridges on page 63.)
No File The memory card or USB Flash
memory drive in the media drive
does not contain a .JPG file.
Put the correct memorycard or USB Flash
memory drive into the slot again.
No Paper Fed The machine is out of paper or
paper is not properly loaded in the
paper tray.
Do one of the following:
Refill the paper in the paper tray, and then
press Mono Start or Colour Start.
Remove the paper and load it again and then
press Mono Start or Colour Start.
The paper is jammed in the machine.
See Printer jam or paper jam on page 61.
Out of Memory The machine's memory is full. Copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
Printing operation in progress
Reduce print resolution. (For details, see
Printing for Windows
®
or Printing and Faxing for
Macintosh
®
in the Software User's Guide on the
CD-ROM.)
The memory card (DCP-150C,
153C, or 157C users only) or USB
Flash memory drive you are using
does not have enough free space to
scan the document.
Delete unused files from your memory card
(DCP-150C, 153C, or 157C users only) or USB
Flash memory drive to make some free space
and then try again.
Paper Jam Paper is jammed in the machine. Remove the Jam Clear Cover (at the back of the
machine) and pull out the jammed paper. (See
Printer jam or paper jam on page 61.)
Print Unable XX
The machine has a mechanical
problem.
—OR
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, disconnect the machine from the
power source for several minutes then
reconnect it.
Scan Unable XX
The machine has a mechanical
problem.
—OR
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, disconnect the machine from the
power source for several minutes then
reconnect it.
Unusable Device
A broken device has been
connected to the USB direct
interface.
Unplug the device from the USB direct interface,
then press On/Off to turn the machine off then
on again.
Error Message Cause Action
Page view 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 98 99

Comments to this Manuals

No comments