Brother DCP-7010L User Manual download pdf (Page 55)

Troubleshooting and routine maintenance

6 - 23

6

Replacing the drum unit

(DR-2000)

The machine uses a drum unit to create print

images on paper. If the LCD shows

Change Drum Soon

, the drum unit is near

the end of its life and it is time to buy a new

one.

Even if the LCD shows

Change Drum Soon

,

you may be able to continue printing without

having to replace the drum unit for a while.

However, if there is a noticeable deterioration

in the output print quality (even before

Change Drum Soon

appears), then the

drum unit should be replaced. You should

clean the machine when you replace the

drum unit. (See Cleaning the laser scanner

window on page 6-18.)

Note

The drum unit is a consumable item, and it is

necessary to replace it periodically. There are

many factors that determine the drum life,

such as temperature, humidity, type of paper

and how much toner you use for the number

of pages per print job. The estimated drum life

is up to 12,000 pages. The actual number of

pages your drum will print may be

significantly less than these estimates.

Because we have no control over the many

factors that determine the actual drum life, we

cannot guarantee a minimum number of

pages that will be printed by your drum.

1

Open the front cover and pull out the

drum unit and toner cartridge assembly.

CAUTION

When removing the drum unit, handle it

carefully because it contains toner. If toner

scatters and your hands or clothes get

dirty, immediately wipe or wash with cold

water.

WARNING

Just after you have used the machine,

some internal parts of the machine are

extremely HOT! So please be careful.

CAUTION

To prevent damage to the printer from

static electricity, do not touch the

electrodes shown below.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 68 69

Comments to this Manuals

No comments