Brother HL-3045CN User Manual download pdf

English

User Settings on Color/Mono 0

Users can change the Color/Mono settings on the printer driver as follows

Auto

The machine checks the content of the document for color. If color is detected anywhere in

the document, it will print the whole of the document using all the colors. If no color content

is detected, it will print the document in monochrome.

The default setting on your machine is “Auto”.

Color

Whether the document contains color or just monochrome, your machine will print the

document using all the colors. This means, for example, that the machine will consume color

toner to print documents comprised solely of black text. If either the Cyan, Magenta or

Yellow toner reaches the end of its life while printing a document in Color mode, the print

job cannot be completed. Users can choose to start the print job again in Mono mode, as

long as black toner is available.

Mono

Select this mode if the document has only black and grayscale text and/or objects. If your

document contains color, selecting Mono mode prints the document in 256 levels of gray.

Note

Users who print primarily black text should select Mono mode to prolong the life of their color

toner cartridges.

Toner Cartridge Life 0

Methods of detecting toner cartridge life

This product detects the life of the toner cartridges using the following two methods:

 Detection by an optical toner sensor

This product has an optical sensor that detects the remaining toner by checking the level

at which toner in a cartridge interrupts light transmitted through windows on either side of

the cartridge. Toner that sticks to the windows or is unevenly distributed in the cartridge

can interfere with the functioning of this sensor, but such interference can often be

resolved by removing, rocking and replacing the cartridge.

 Detection by counting the rotations of the developer roller

This product has a function that will count the rotations of each toner cartridge’s developer

roller and stop the print operation when the upper rotation limit is reached. The upper limit is

set above the number of rotations that would be required for the cartridge to perform

consistently with its advertised page yield. This function is intended to reduce the risk of poor

print quality and damage to the printer. Users who are not printing color documents can “turn

off” this function for their color cartridges by printing in

Mono

mode (For HL-XXXX, see

Printer

Driver

in Chapter 2 of the User’s Guide.

For DCP-XXXX/MFC-XXXX, see

Basic tab

in Chapter 1 of the Software User’s Guide.).

1 2 3 4 5 6 ... 10 11

Summary of Contents

Page 1 - Toner Cartridge Life 0

1English User Settings on Color/Mono 0Users can change the Color/Mono settings on the printer driver as followsAutoThe machine checks the content of t

Page 2

10Os registros são realizados principalmente nos seguintes momentos:- Após um determinado intervalo de tempo e dependendo de por quanto tempo a impres

Page 3 - English

Page 4

2When the toner reaches its life end as determined by either of these two methods, the printer will notify users by displaying a message on the LCD. T

Page 5

3English Paramètres de l'utilisateur pour Couleur/Mono 0L'utilisateur peut changer les paramètres pour Couleur/Mono dans le pilote d'im

Page 6

4Quand le toner atteint la fin de sa durée de vie, déterminée selon l'une de ces deux méthodes, l'imprimante en informe l'utilisateur e

Page 7

5English Le repérage s'effectue surtout à ces occasions :-- Quand un laps de temps calculé pour garantir la performance optimale de l'appare

Page 8 - Configuração de Cor/Mono 0

6Configuración de usuario de Color/Monocromo 0Los usuarios pueden cambiar la configuración de Color/Monocromo en el controlador de impresora del sigui

Page 9

7English Cuando el tóner llegue al final de su vida útil de acuerdo con cualquiera de estos dos métodos, la impresora lo notificará a los usuarios a t

Page 10

8Configuração de Cor/Mono 0O procedimento para modificar a configuração Cor/Mono no driver da impressora é o seguinteAuto (Automático)A impressora ana

Page 11

9English Quando um dos dois métodos acima indicar que o toner chegou ao final de sua vida útil, a impressora exibirá uma mensagem no LCD para informar