Brother 882-D80 Instruction Manual download pdf (Page 60)

USING SENSOR FUNCTIONS IN “EMBROIDERY”/“EMBROIDERY EDIT” MODE

B-58

Before using the sensor functions, carefully read the procedure in “Embroidery” and “Embroidery Edit” to

familiarize yourself with the machine operations.

Specifying the Embroidering

Position With the Sensor Pen

By using the sensor pen, the embroidering position

can be adjusted to the desired location. This

function can be performed in either “Embroidery”

or “Embroidery Edit” mode, but the procedure

described below is performed in “Embroidery”

mode.

If the message “The carriage of the embroidery

unit will move. Keep your hands etc. away from

the carriage.” appears during the operation, ensure

safety, and then press .

Turn on the machine.

Press (Embroidery)/

(Embroidery Edit).

Select the category for the pattern to be

embroidered.

In the pattern selection screen, press the

key for the pattern to be embroidered.

Press .

Hoop the fabric and attach the embroidery

frame to the machine.

→ Refer to “Hooping the Fabric in the Embroidery

Frame” on page E-13 and “ATTACHING THE

EMBROIDERY FRAME” on page E-17.

Press .

→ Select the desired area and press when the

following message appears (only for use of the extra

large embroidery frame).

USING SENSOR FUNCTIONS IN

“EMBROIDERY”/“EMBROIDERY EDIT” MODE

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 179 180

No comments

Brother 882-D80 Instruction Manual Page 60