Brother 4234D User Manual Page 2
- Page / 80
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
IMPORTANT SAFETY INSTRUCTIONS
When using the sewing machine, basic safety precautions should always be followed, including the following.
Read all instructions before using.
DANGER
To reduce the risk of electric shock.
The sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the
electrical outlet immediately after using and before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons.
1. Do not allow to be used as a toy. Close attention is necessary when the sewing machine is used by or near children.
2. Use this sewing machine only for its intended use as described in this manual. Use only accessories recommended by
the manufacturer as contained in this manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for
examination, repair, electrical or mechanical adjustment.
4. Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and
foot controller free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any openings.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn the main switch to the symbol "O" position which represents off, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch the sewing machine to the symbol "O" position when making any adjustments in the needle area, such as
threading needle, changing needle, or changing presser foot, etc.
15. Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any
other user servicing adjustments mentioned in the instruction manual.
16.This sewing machine is not intended for use by young children or infirm persons without supervision.
17.Young children should be supervised to ensure that they do not play with this sewing machine.
18. Do not disassenble the machine.
19. If the LED light unit (light-emitting diode) is damaged, it must be replaced by authorized dealer.
CAUTION
To use the machine safely
1. (For U.S.A. only)
This appliance has a polarized plug (one blade wider than the other) to reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the
proper outlet.
Do not modify the plug in any way.
2. Make sure you watch the needles carefully while you are sewing. Do not touch the hand wheel, needles, knives, or
other moving parts.
3. Turn off the main power and unplug the cord in the following circumstances:
- When you have stopped using the machine
- When you are replacing or removing the needle or any other part
- If there is a power failure while you are using the machine
- If you are checking or cleaning the machine
- Leaving the machine unattended
4. Do not store anything on the foot controller.
5. Fully plug the machine directly into the wall. Do not use extension cords.
6. If water is dropped on the machine, unplug the machine immediately, and contact your local authorized dealer.
7. Do not put furniture on the cord.
8. Do not bend the cord, or pull on the cord to unplug.
9. Do not touch the cord with wet hands.
10. Place the machine near to the wall outlet.
11. Do not place the machine on an unstable surface.
12. Do not put on the soft cover.
13. If you notice any abnormal sound or condition, consult your local authorized dealer.
II
II
I
- HANDBOOK FOR COMPACT 1
- OVERLOCK MACHINE 1
- MANUAL DE INSTRUCCIONES DE LA 1
- MAQUINA COMPACTA OVERLOCK 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- IMPORTANT 3
- Notes on the motor 4
- Contents 5
- CHAPTER 1 6
- Accessories 7
- Powering the machine 8
- Opening/ Closing front cover 8
- Trim trap 9
- Wide table 9
- Retracting knife 10
- Stitch length 10
- Stitch width 10
- Differential feed adjustment 11
- Tension control 12
- Needle description 15
- How to check the needle 15
- CHAPTER 2 16
- PREPARATION BEFORE THREADING 16
- CHAPTER 3 17
- THREADING 17
- Lower looper easy threading 19
- Threading the upper looper 20
- Threading the left needle 21
- Threading the right needle 21
- Threading the needle 22
- (using the needle threader) 22
- CHAPTER 4 23
- CHAPTER 5 24
- To start sewing 25
- To remove work 25
- Chaining-off 25
- To secure chain 26
- To sew fine materials 27
- Two-thread sewing 28
- Rolled hemming stitches 29
- CHAPTER 6 31
- TROUBLESHOOTING 31
- CHAPTER 7 32
- MAINTENANCE 32
- CHAPTER 8 33
- INTRODUCTION OF OPTIONAL FEET 33
- Pin tuck stitching 34
- Features 35
- How to set the elastic / tape 35
- Test sewing 35
- Preparation 36
- How to adjust the machine 36
- How to set fabric and pearl 36
- Piping foot 37
- 1 Surface 2 Reverse 37
- Gathering foot 38
- 1 Surface 2 Reverse 38
- SPECIFICATIONS 39
- ADVERTENCIA 40
- PRECAUCIÓN 40
- IMPORTANTE 41
- MAQUINA OVERLOCK 42
- Notas sobre el motor 42
- Contenido 43
- CAPÍTULO 1 44
- Accesorios 45
- Activación de la máquina 46
- Funcionamiento 46
- <A> 47
- <B> 47
- Repliegue de la cuchilla 48
- Largo de las puntadas 48
- Ancho de las puntadas 48
- 0,7 - 1,0 49
- Disco de ajuste de la tensión 50
- F: Hilo del áncora inferior 51
- Descripción de la aguja 53
- Cómo comprobar la aguja 53
- CAPÍTULO 3 55
- ENHEBRADO 55
- PRECAUCIÓN 57
- Enhebrado del áncora superior 58
- CAPÍTULO 4 61
- CAPÍTULO 5 62
- Para empezar a coser 63
- Para retirar el trabajo 63
- Cadeneta 63
- Para asegurar la cadeneta 64
- Para coser tejidos finos 65
- Puntada de dos hilos 66
- <B><A> 67
- CAPÍTULO 6 69
- CAPÍTULO 7 70
- MANTENIMIENTO 70
- CAPÍTULO 8 71
- Puntadas de pliegues pequeños 72
- Características 73
- Costura de prueba 73
- Preparación 74
- Cómo ajustar la máquina 74
- Prensatelas para ribeteados 75
- 1 Superficie 2 Revés 75
- 1 Superficie 2 Revés 76
- Prensatelas fruncidor 76
- ESPECIFICACIONES 77
- XB2006001 80
- Printed in Taiwan 80
Related products and manuals for Sewing machines Brother 4234D
Sewing machines Brother PR-650 User Manual
(280 pages)
(280 pages)
Sewing machines Brother NX-2000 User Manual
(48 pages)
(48 pages)
Sewing machines Brother PR-650 User Manual
(40 pages)
(40 pages)
Sewing machines Brother PR655 User Manual
(280 pages)
(280 pages)
Sewing machines Brother NX-2000 User Manual
(20 pages)
(20 pages)
Sewing machines Brother PR-1000 User Manual
(320 pages)
(320 pages)
© 2020, manymanuals.com. All rights reserved. | 0.411 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals