Brother LX2500 User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 92
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
16
1
8
Put the thread behind the guide above the
needle.
The thread can easily be passed behind the
needle bar thread guide by holding the
thread in your left hand, then feeding the
thread with your right hand.
1 Needle bar thread guide
9
Thread the needle from front to back
leaving a thread tail of about 5 cm
(2 inches).
1 5 cm (2 inches)
Note
Make sure you raise the presser foot lever
and the thread take-up lever before you feed
the upper thread.
If you incorrectly feed the thread you may
cause sewing problems.
Drawing up the lower
thread
1
While lightly holding the end of the upper
thread, slowly turn the handwheel toward
you (counterclockwise) by hand to lower
and then raise the needle.
2
Pull on the upper thread to draw up the
lower thread.
1 Upper thread
2 Lower thread
3
Pull out about 10 cm (4 inches) of both
threads and put them toward the back of
the machine under the presser foot.
1 Upper thread
2 Lower thread
1
1
1
1
2
2
1
2
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 91 92

Comments to this Manuals

No comments