Brother NX-2000 User Manual download pdf (Page 6)

Contents

About the Circular Attachment

This device can sew circular patterns that graduate out at 5mm intervals, ranging from 30mm to 130mm in

radius* when the center needle position is selected. The device is set to the left of the needle on your sewing

machine. Utility and decorative stitches can both be sewn using this device.

Radius= Distance from center of circle to any point on the circle.

Included Accessories

Note

• You cannot use any decorative stitch with side feeding, or stitches over 7.0 mm in width. Use fabrics with a thickness of

less than 4mm (approx. 3/16”).

CAUTION

• Special care is required for the pivot pin; Neglectful treatment may cause injury. Young children should

be supervised to ensure that they do not play with the attachment. When attachment is not in use, always

keep the pivot pin in the indicator to avoid its loss.

Conversion Chart

mm (f)inch

130 5 3/16

120 4 3/4

110 4 3/8

100 4

90 3 1/2

80 3 3/16

70 2 3/4

60 2 3/8

50 2

40 3/2

30 13/16

567

No. Part Name Part Code

1 Circular Attachment

a Indicator

b Handle/Flips Up

c Release button

d Setting position for pivot pin

e Scale

2 Pivot Pin XE6016-001

3 Attachment Screw

(2pcs. one is extra)

XE6022-001

4 Template

f Radius of circle in mm

g Angular lines listed in degrees

starting at 0 with 5 degree

intervals

h Center

XE6024-001

5 Instruction Manual This Manual

6 Braiding Foot SA141/F021N

7 Cording Foot SA110/F013N

Note

• We recommend that you use the extension table on

your sewing machine for smooth fabric control.

• Do not raise the extension table when the circular

devise is attached.

• The pivot pin may be released if you hold up the

fabric while attached to the circular attachment.

When holding up the fabric gently press down on the

top of the pivot pin.

• When sewing smaller circles or using fabric with a

grain or uneven textures, a perfect circle may not be

achieved.

• Some of presser feet such as the side cutter cannot

be used with this attachment, always test your

accessory feet with the attachment.

• When using this attachment test the sewing speed

of your machine for the best results.

• When sewing larger pieces of fabric or garments,

make sure that your fabric or garment does not get

caught on the machine creating drag or distortion of

your design.

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comments to this Manuals

No comments

Brother NX-2000 User Manual Page 6

Comments to this Manuals

Related products and manuals for Sewing machines Brother NX-2000