Brother PC-420 User Manual download pdf (Page 65)

Useful Functions 59

GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX

Press to select .

To return to , press .

X The machine is now set for programmed

thread-cutting.

Press (OK key).

X The initial stitch screen appears again, and

appears in the lower-left corner of the

screen.

• When the sewing machine is turned off, the

programmed thread-cutting setting is

cancelled.

Position the fabric under the presser foot, and

then press (start/stop button) once.

1 Start/stop button

X After reverse/reinforcement stitches are

sewn, the machine starts sewing.

After reaching the end of the stitching, press

(reverse/reinforcement stitch button)

once.

This step is not necessary if a stitch such as

those for sewing buttonholes and bar tacks is

selected where reinforcement stitches are

automatically sewn.

X After reverse/reinforcement stitches are

sewn, the sewing machine stops and cuts

the thread.

Memo

● Reverse/reinforcement stitches will not be

sewn and the thread will not automatically

be cut if the start/stop button is pressed at

the end of the stitching. Be sure to press the

reverse/reinforcement stitch button at the

end of the stitching.

The thread is cut here.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 152 153

No comments

Brother PC-420 User Manual Page 65