Brother S-7000DD User Manual download pdf (Page 27)

S-7000DD

4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

4-3. Setting the counters

The lower thread counter, thread trimming counter and needle replacement counter can be displayed.

The three counters can be operated at the same time.

4-3-1. Lower thread counter

The lower thread counter can be used to let you know approximately how much lower thread is remaining.

Press the SEL key so that the COUNT indicator is illuminated.

・ The lower thread counter value will appear

in the four columns of the display.

Press the ENTER key for 2 seconds or more, and then press the

C or D key to set the initial value.

・ When the D key is pressed, the setting

increases by 1.

・ When the C key is pressed, the setting

decreases by 1.

NOTE:

・ The setting range is from 0 to 9999.

・ If an initial value of “0” is set, the lower

thread counter will not operate.

0509D

(Press for 2 seconds or more.)

0510D

・ The lower thread counter is reduced by 1 from the initial setting value each time the sewing machine sews 10 stitches,

and a warning is given when the counter goes below“0”.

0511D

When the warning occurs, the COUNT indicator flashes,

and a buzzer sounds for 5 seconds.

・ Se

wing will be possible even after the treadle is returned to the neutral position and the sewing machine stops. However,

after the treadle has been depressed backward and thread trimming has been carried out, sewing using the treadle will no

longer be possible.

If the treadle is depressed at this time, “ Ent” will appear in the display. When the treadle is returned to the neutral position,

the display will return to the current counter display.

・ If the ENTER key is pressed while the lower thread counter is displayed, the COUNT indicator will change to illuminated

and sewing can then be carried out using the treadle.

If the ENTER key is pressed again for 2 seconds or more, the counter display will return to the initial value and counting

from the initial value will be possible.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

No comments

Brother S-7000DD User Manual Page 27