Brother DCP-7045N User Manual download pdf (Page 71)

Troubleshooting and routine maintenance

63

B

Cleaning the scanner glass B

a Turn off the machine’s power switch.

Disconnect all cables and then unplug

the power cord from the electrical

socket.

b Lift the document cover (1).

Clean the white plastic surface (2) and

scanner glass (3) underneath it with a

soft lint-free cloth moistened with water.

c (DCP-7045N only) In the ADF unit,

clean the white bar (1) and the scanner

glass strip (2) underneath it with a soft

lint-free cloth moistened with water.

d Plug the machine’s power cord back into

the electrical socket first, and then

reconnect all cables. Turn on the

machine’s power switch.

Note

In addition to cleaning the scanner glass

and glass strip with a soft lint-free cloth

moistened with water, run your finger tip

over the glass to see if you can feel

anything on it. If you feel dirt or debris,

clean the glass again concentrating on

that area. You may need to repeat the

cleaning process three or four times. To

test, make a copy after each cleaning.

Cleaning the laser scanner

window B

WARNING

Use neutral detergents.

DO NOT use any flammable substances,

spray or organic solvent/liquids containing

alcohol/ammonia to clean the inside or

outside of the machine. Doing this may

cause a fire or electrical shock. For more

information see Important safety

instructions on page 40.

CAUTION

DO NOT touch the laser scanner window

with your fingers.

a Before you clean the inside of the

machine, turn off the machine’s power

switch.

Unplug the power cord from the

electrical socket.

1

3

2

1

2

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 106 107

Comments to this Manuals

No comments