Brother Fax-170 User Manual download pdf (Page 66)

C H A P T E li T E N

Dialing Does Not Work

Check for a dial tone.

Change TONE/PULSE setting (see “Fax Settings”).

Check all line cord connections, and make sure the curled handset cord is not in

the

EXT

jack.

Check power cord connection.

Send a manual fax (press |Hook| or lift handset), and wait to hear fax receiving

tones before pressing (^.

Enabling/Disabling Anti-Curl Check Sheet (ACS)

Although the factory setting of Anti-Curl Check Sheet feature is OFF, you can

check the status of your fax machine’s Anti-Curl (ACS) feature by printing an

Anti-Curl Check Sheet.

Press Q] and [j] at the same time to print an ACS Check Sheet.

Press Q] and [U at the same time to discontinue printing ACS Check Sheet,

Fax Machine Does Not Answer When Called

Make sure the fax machine is not in MANUAL mode.

Make sure it is in the correct receiving mode for your setup (either FAX ONU, F/T

or TAD). Check for dial tone. If possible, call your fax machine to hear if it chirps.

No Dial Tone on the Handset

Press

[Hook).

If you hear no dial tone, check telephone line cord connections at the

fax machine and wall j ack. x''

Poor Transmitting Quality

Try changing your resolution to FINE or SUPERFINE (see “Sending Faxes”).

Try cleaning the white pressure bar of the scanner and the glass under the bar

(seep.

Vertical Black Lines When Receiving

The sender’s scanner may be dirty. Ask the sender to make a copy to see if the

problem is with the sending machine.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72 73 74

No comments

Brother Fax-170 User Manual Page 66