Brother NC-2100p User Manual download pdf (Page 89)

APPENDIX

APPENDIX-1

APPENDIX

Appendix A

General Information

You can change the configuration of your print server using any of the following

methods.

•

Brother BRAdmin Professional utility for Windows 95 or later

•

HTTP (using a web browser)

•

HP’s JetAdmin or WebJetAdmin Software

•

TELNET (command utility)

BRAdmin Professional utility

(Recommended)

The Brother BRAdmin Professional utility can use the TCP/IP protocol. This utility

allows you to graphically manage aspects of the network and printer. It can also be

used to upgrade the firmware of the print server.

HTTP (Recommended)

Use your favorite web browser to connect to the Brother print server. This will allow

you to configure print server parameters.

JetAdmin or WebJetAdmin

Brother’s print server range is HP JetAdmin and WebJetAdmin compatible.

TELNET

To connect to the print server using TELNET on UNIX, Windows NT, or most other

TCP/IP systems, type: TELNET ipaddress at the command prompt of the system

prompt, where ipaddress is the IP address of the print server. When you are

connected, push RETURN or ENTER to get the "#" prompt, enter the password

"access" (the password will not appear on the screen), and type anything in response

to the Enter Username> prompt. When you see the Local> prompt, you are ready to

enter commands.

Enter HELP at the command prompt for a list of supported commands.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 95 96

No comments

Brother NC-2100p User Manual Page 89