Brother DCP-7040 User Manual download pdf (Page 18)

Chapter 2

12

Type and size of paper 2

The machine loads paper from the installed

standard paper tray or manual feed slot.

Standard paper tray 2

Since the standard paper tray is a universal

type, you can use any of the paper sizes (one

paper type and size at a time) listed in the

table in Paper capacity of the paper trays

on page 12. The standard paper tray can

hold up to 250 sheets of Letter/A4 (Legal or

Folio for Asia) size paper (80 gsm). Paper can

be loaded up to the maximum paper mark on

the sliding paper width guide.

Manual Feed Slot 2

The manual feed slot can hold a sheet with a

size of 76.2 to 220 mm wide and 116 to

406.4 mm long. You can use the manual feed

slot if you are using special paper, envelopes

or labels.

Paper capacity of the paper trays 2

1

Folio size is 215.9 mm x 330.2 mm.

Recommended paper specifications 2

The following paper specifications are suitable for this machine.

Paper size Paper types No. of sheets

Paper Tray (For Oceania)

A4, Letter, Executive, A5, A6, B5, B6.

Plain paper and recycled

paper

up to 250

(80 gsm)

(For Asia)

A4, Letter, Legal, Executive, A5, A6,

B5, B6 and Folio.

1

Transparency up to 10

Manual Feed Slot Width: 76.2 to 220 mm

Length: 116 to 406.4 mm

Plain paper, recycled

paper, bond paper,

envelopes, labels and

transparencies

1

Basis weight 75-90 gsm

Thickness 80-110 µm

Roughness Higher than 20 sec.

Stiffness

90-150 cm

3

/100

Grain direction Long grain

Volume resistivity

10e

9

-10e

11

ohm

Surface resistivity

10e

9

-10e

12

ohm-cm

Filler CaCO

3

(Neutral)

Ash content Below 23 wt%

Brightness Higher than 80 %

Opacity Higher than 85 %

1 ... 17 18 19 ... 103

Comments to this Manuals

No comments