Brother DCP1200 User Manual Page 69

  • Download
  • Add to my manuals
  • Print
  • Page
    / 143
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 68
5 - 11
PRINTING
Printing PC Data in Hexadecimal
1
Press
Menu
until you see 3.RESET PRINTER.
2
Press
3
on the numeric keys to select it.
3
Press
Menu
until you see
2.HEX DUMP MODE
100%
2.HEX DUMP MODE.
4
Press
2
on the numeric keys to
1.SET 2.EXIT
100%
select it.
5
Press
1
to print a hexadecimal dump of
the PC data.—OR—Press
2
to exit
without making a change.
Printing from DOS
How to Use the Copier/Printer with Your DOS
Application Software
Before working with your application software that runs on DOS, check
that the Brother machine’s name appears in the printer selection of your
application software. If the machine is not listed, you must select the
printer that corresponds to HP LaserJet IIP’s emulations.
The following table shows combinations of printer drivers and emulation
mode. To get the most out of this machine, you should install an HP
printer driver in your application software.
Printer driver supported in Emulation mode to be selected with
your application software the remote printer console program
HP LaserJet IIP™ HP LaserJet IIP emulation mode
HP LaserJet II™ Auto emulation selection
The best or recommended printer driver is indicated in bold.
Be sure to choose the proper printer driver in your application software.
Be sure the printing resolution is set to 300 dpi in your DOS application
software.
What Does the Remote Printer Console Do?
The Remote Printer Console (RPC) is a utility program that can run in the
DOS environment and comprises the following two programs:
Page view 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 142 143

Comments to this Manuals

No comments