Brother HL-2275DW Setup Guide download pdf (Page 12)

12

Macintosh

Wired Network

For Wired Network Cable Users for Macintosh

(HL-2270DW and HL-2275DW only)

6

Before you install

a Make sure your machine is plugged in and your

Macintosh is switched ON. You must be logged

on with Administrator rights.

b Remove the protective cap from the LAN

connector.

c Connect the network cable to the LAN

connector marked with a symbol and then

connect it to a free port on your hub.

d Make sure the machine power switch is on.

7

Install the printer driver

a Put the installation CD-ROM into your

CD-ROM drive.

b Double-click the Start Here OSX icon. Follow

the on-screen instructions.

c Follow the on-screen instructions until this

screen appears. Choose your machine from

the list, and then click OK.

IMPORTANT

• For the latest drivers and information on the

Mac OS X you are using, visit

http://solutions.brother.com/.

• For Mac OS X 10.4.0 to 10.4.10 users,

upgrade to Mac OS X 10.4.11 - 10.6.x.

Note

It may take a few minutes for installation to

complete.

Note

• If there is more than one of the same model

connected on your network, the MAC Address

(Ethernet Address) will be displayed after the

model name.

• You can find your machine’s MAC Address

(Ethernet Address) and IP Address by printing

out the Printer Settings Page. See Print the

Printer Settings Page on page 31.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 34 35

Comments to this Manuals

No comments