Brother DCP-750CW User Manual download pdf (Page 11)

Setting Up the Machine

9

6 Print quality check

1 After the cleaning cycle is finished, the LCD

shows:

Set Paper and Press

2 Make sure paper is loaded in the paper tray.

Press Colour Start.

The machine starts printing the Print Quality

Check Sheet (only during initial ink cartridge

installation).

3 Check the quality of the four colour blocks on

the sheet.

(black/yellow/cyan/magenta)

Improper Setup

Avoid touching the printed surface of the

paper immediately after printing, the surface

may not be completely dry and may stain your

fingers.

4 The LCD shows:

Is Quality OK?

Yes iPress

No iPress

5 Do one of the following:

 If all lines are clear and visible, press

(Yes) to finish the quality check.

 If you can see missing short lines, press

(No) and go to step 6.

6 The LCD asks you if the print quality is OK for

black and colour. Press (Yes) or (No).

Black OK?

Yes iPress

No iPress

Color OK?

Yes iPress

No iPress

After pressing (Yes) or (No) for both

black and colour, the LCD shows:

Start Cleaning?

Yes iPress

No iPress

7 Press (Yes), the machine will then start

cleaning the colours.

8 After cleaning is finished, press Colour Start.

The machine starts printing the Print Quality

Check Sheet again and goes back to step 3.

OK Poor

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 50 51

Comments to this Manuals

No comments