Brother HL-4200CN User Manual download pdf (Page 103)

TROUBLESHOOTING 5 - 14

Others Problems

Network Problems

Symptom Possible Cause Action

The IP address

changes when

turning on the printer

Is the printer set to acquire an IP address

through a DHCP server?

Set the IP address acquisition method to

"Panel". See Setting an IP Address on page

1-4.

Cannot use a web

browser to manage

the printer.

Is the printer off? Press the I on the power switch to turn the

printer on.

See Turn the Printer On on page 2-4.

Is the Ethernet cable loose or

disconnected?

Turn the printer off and check the Ethernet

cable. If necessary, reconnect the cable,

then turn the printer back on.

Is the printer's Internet address correct? Confirm that the printer’s Internet address is

correct. If the problem persists, use an IP

address to connect to the printer instead.

Is the printer's IP address correct? The IP address might be set incorrectly.

Ask your system administrator for the

correct settings.

Use the printer configuration list to confirm

the current IP address.

Are you using a proxy server? Certain proxy servers block access to the

printer.

Configure your Web browser so that it does

not use the proxy server or set the address

you want to access so that it does not go

through the proxy server.

Is the port number correct? The default port number is "80". Specify the

correct port number.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 165 166

No comments

Brother HL-4200CN User Manual Page 103