Brother HL-S7000DN User Manual download pdf (Page 33)

Configuring your machine for a wireless network

Configuration in Ad-hoc mode (For IEEE 802.11b) 3

Using configured SSID 3

If you are trying to pair the machine to a computer that is already in Ad-hoc mode with a configured SSID,

you will need to complete the following steps:

a Before configuring your machine we recommend you write down your wireless network settings. You will

need this information before you continue with the configuration.

Check and record the current wireless network settings of your computer you are connecting with.

Note

The wireless network settings of the computer you are connecting with must be set to Ad-hoc mode with

a SSID already configured. For instructions on how to configure your computer to Ad-hoc mode please

see the information included with your computer, or contact your network administrator.

Note

Your Brother machine supports the use of the first WEP key only.

b Press Menu.

c Press a or b to choose Network.

Press OK.

d Press a or b to choose WLAN.

Press OK.

e Press a or b to choose Setup Wizard.

Press OK.

Network name: (SSID)

Communication Mode Encryption mode Network Key

Ad-hoc NONE —

WEP

For example:

Network name: (SSID)

HELLO

Communication Mode Encryption mode Network Key

Ad-hoc WEP 12345

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 116 117

No comments

Brother HL-S7000DN User Manual Page 33