Brother MFC J5910DW User Manual download pdf (Page 33)

33

For Wireless Network Users

Wireless Network

19

One-push configuration

using WPS or AOSS™

(Windows

®

and

Macintosh)

a Confirm your wireless access point/router has

the WPS or AOSS™ symbol as shown below.

b Place the Brother machine within range of your

WPS or AOSS™ access point/router. The

range may differ depending on your

environment. Refer to the instructions provided

with your access point/router.

c On your machine, press Menu.

Press s or t to display Network, and then

press Network.

Press WLAN.

Press s or t to display WPS/AOSS, and then

press WPS/AOSS.

When Network I/F switched to

Wireless. is displayed, press Yes to accept.

This will start the wireless setup wizard.

To cancel, press No.

d When the LCD shows Start WPS or AOSS,

press the WPS or AOSS™ button on your

wireless access point/router. See the user’s

guide of your wireless access point/router for

instructions.

Then press OK and your machine will now

automatically detect which mode (WPS or

AOSS™) your wireless access point/router

uses and try to connect to your wireless

network.

e A connection result message appears for

60 seconds on the LCD and a WLAN report will

automatically be printed.

If the connection failed, check the error code on

the printed report and refer to Troubleshooting

on page 34.

Wireless setup is now complete. A four

level indicator at the upper left your

machine’s LCD will show the wireless

signal strength of your access

point/router.

To install MFL-Pro Suite, continue to

step 20.

For Windows

®

Users:

Now go to

Page 36

For Macintosh Users:

Now go to

Page 39

Note

If your wireless access point/router supports WPS

(PIN Method) and you want to configure your

machine using the PIN (Personal Identification

Number) Method, see Configuration using the

PIN Method of Wi-Fi Protected Setup in the

Network User’s Guide.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 42 43

Comments to this Manuals

No comments