Brother QL-1060N User Manual download pdf (Page 26)

Transferring templates to the printer via the network (QL-580N /

1060N / 720NW only)

IntroductionCreating LabelsAppendix

Transferring templates to the printer via the network

(QL-580N / 1060N / 720NW only)

To transfer the templates to the printer via the network, you need to use BRAdmin Professional. BRAdmin

Professional can be downloaded from our website at http://solutions.brother.com.

The printer names and pictures in the following screens may differ from your purchased printer. The screens

may vary depending on the model.

1 Create the template you want to transfer with P-touch Editor 5.0, then choose [File]-

[Transfer Template...] menu to register.

2 Click to save the registered template in .blf format.

3 Start BRAdmin Professional.

Choose the printer and [Load Firmware] from the [Control]

menu.

4 Choose Load Firmware function of the BRAdmin

Professional.

Choose [TFTP PUT] and click the [OK] button.

5 Choose the file in .blf format which you saved in step 2

and load it to the printer.

Choose the .blf file and click the [OK] button.

If multiple printers are connected, you can find the

desired printer from its IP address.

The IP address can be checked by printing the printer

set-up information.

Press and hold down the Cut button when the power is

on to print the printer set-up information.

The default password is "access".

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

No comments

Brother QL-1060N User Manual Page 26