Brother 885-U01 Instruction Manual download pdf (Page 64)

SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Automatically cutting the

thread

The sewing machine can be set to automatically cut

the threads at the end of the stitching. This is called

“programmed thread-cutting”. If programmed thread-

cutting is set, automatic reverse/reinforcement

stitching is also set.

Turn on the sewing machine.

X The LCD comes on.

Select a stitch.

• For details on selecting a stitch, refer to

“Selecting stitching” (page 51).

Press on the screen.

X You get , and the sewing machine is

set for programmed thread-cutting and

automatic reverse/reinforcement stitching.

• To turn programmed thread cutting off, press

Set the fabric in place, and press (Start/

stop button) once.

a Start/stop button

X Stitching starts after reverse stitching or

reinforcement stitching.

Once you have reached the end of the

stitching, press (Reverse/reinforcement

stitch button) once.

If stitching, such as buttonholes and bar

tacking, that includes reinforcement stitching

has been selected, this operation is

unnecessary.

X After the reverse stitching or reinforcement

stitching has been done, the sewing machine

stops, and the thread is cut.

Memo

z Programmed thread-cutting will not be

performed if (Start/stop button) is

pressed while sewing. Press (Reverse/

reinforcement stitch button) at the end of the

stitching.

z If the power is turned off, programmed

thread-cutting will be turned off.

The thread is cut here.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 211 212

No comments

Brother 885-U01 Instruction Manual Page 64