Brother 885-V67 Specifications download pdf (Page 29)

SEWING BASICS ——————————————————————————————————————————————————

—

28

Starting to sew

a

Raise the needle by turning the handwheel

toward you (counterclockwise) so that the mark

on the wheel points up. (With models equipped

with (needle position button), raise the

needle by pressing once or twice.)

b

Raise the presser foot lever.

a Presser foot lever

c

Place the fabric under the presser foot, pass

the thread under the presser foot, and then

pull out about 5 cm (2 inch) of thread toward

the rear of the machine.

a 5 cm (2 inch)

d

While holding the end of the thread and the

fabric with your left hand, turn the handwheel

toward you (counterclockwise) with your

right hand to lower the needle to the starting

point of the stitching.

e

Lower the presser foot lever.

a Presser foot lever

f

On models equipped with a sewing speed

controller, slide the sewing speed controller

to the left or right to adjust the sewing speed.

Refer to “Sewing speed controller” (page 10).

a Sewing speed controller

g

Slowly press down on the foot controller.

(With models equipped with (start/stop

button), if the foot controller is not connected,

press once.)

a Start/stop button

X The machine starts sewing.

h

Take your foot off the foot controller, or press

(start/stop button) once (if the machine

was started by pressing (start/stop button))

(for models equipped with the start/stop

button).

X The machine stops sewing.

i

Raise the needle by turning the handwheel

toward you (counterclockwise) so that the

mark on the wheel points up. (With models

equipped with (needle position button),

raise the needle by pressing once or

twice.)

j

Raise the presser foot lever.

a Mark b Needle position button

or

or

1 ... 28 29 30 ... 66

Comments to this Manuals

No comments