Brother CS 80 User Manual download pdf (Page 82)

UTILITY STITCHES ——————————————————————————————————————————————————————

—

Close the zipper, turn over the fabric, and

then baste the other side of the zipper to the

fabric.

1 Basting stitching

Attach the presser foot holder to the other pin

of zipper foot “I”.

If the presser foot holder was attached to the

right pin in step

6, change it to the left pin.

1 Pin on the left side

2 Needle drop point

Topstitch around the zipper.

Sew reverse stitches at the end of the zipper

opening and align the zipper teeth with the

side of the presser foot.

1 Right side of fabric

2 End of zipper opening

3 Reverse stitches

4 Beginning of stitching

5 Basting stitching

When you are about 5 cm (2 inch) from the

end of the zipper, stop the sewing machine

with the needle lowered (in the fabric), and

then raise the presser foot lever.

Remove the basting stitching, open the zipper,

and then continue sewing.

S2_brotherE.book Page 76 Thursday, February 13, 2003 11:03 AM

1 ... 81 82 83 ... 115

No comments

Brother CS 80 User Manual Page 82