Brother XL-5130 Instruction Manual download pdf (Page 57)

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Button Sewing

Pattern Stitch Length Stitch Width Foot

(Zigzag Stitch) Any

Button

Sewing Foot

1. Measure the distance between the holes and set the appropriate

stitch width with the stitch width dial. For example, if the distance

between the holes is 1.5 mm (1/16"), set the stitch width to “1.5”.

2. Attach the button sewing foot.

3. Place the darning plate on the needle plate.

(When the machine is equipped with a drop feed lever, lower the

feed dogs by setting the drop feed lever to the up position.)

4. Place a button between the foot and the fabric and make sure that

the needle enters the holes without hitting the button. If it hits, see

step 1.

5. At a slow speed, sew approximately 10 stitches.

6. Remove the material from the machine. Cut the upper and lower

threads and tie the two threads at the back of the fabric.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 76 77

No comments

Brother XL-5130 Instruction Manual Page 57