Brother P-touch RL-700S User Manual download pdf (Page 42)

Cleaning and maintenance

Troubleshooting

Refer to the following if you have trouble using your machine.

Trouble Causes Solutions

The printer does not

print.

A writing error

occurs.

The cables are not properly

plugged in.

Check the cables, tape cassette, cover

or other parts of the printer.

The tape cassette is not

properly placed in the printer.

The cover is open.

Stripes appear on

TZ, HG or AL tapes.

The tape has run out.

Install a new tape cassette and press

the Feed and Cut button.

The ON/OFF button

of the printer does

not light up.

The power cable is not

properly plugged in.

Check the power cable. If the problem

persists, contact the dealer you

purchased the product or a Brother

service centre.

Unwanted lines are

printed on tape.

The print head of head roller

may be dirty.

See p. 34 "Cleaning the print head and

head roller" and clean the print head

and head roller.

The tape does not

exit the machine

properly.

The cutter blade may be dirty.

See p. 33 "Cleaning the cutter blade"

and clean the cutter blade.

The ink ribbon exits

with the tape.

The ink ribbon was slack

when the tape cassette was

set in the printer.

The printed tape was forcibly

pulled out by hand.

Replace the tape cassette with a new

tape cassette.

"ERROR" message

is printed on the

tape.

RFID writing has failed.

Check if there are any materials that

could affect writing to the RFID tag.

Then, click restart button.

Check if there are any materials

blocking the label output slot or touching

the tape during the printing process.

Then, click the restart button.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 180 181

Comments to this Manuals

No comments

Brother P-touch RL-700S User Manual Page 42

Comments to this Manuals

Related products and manuals for Tools Brother P-touch RL-700S