Brother MFC-9440CN User Manual download pdf (Page 14)

Introduction

Protocols 1

TCP/IP protocols and functions 1

Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain

access to network connected resources.

The print server used on this Brother product supports the TCP/IP (Transmission Control Protocol/Internet

Protocol) protocol.

TCP/IP is the most popular set of protocols used for communication such as Internet and E-mail. This protocol

can be used in almost all operating systems such as Windows

, Macintosh

and Linux.

The following TCP/IP protocols are available on this Brother product.

Note

• You can configure the protocol settings by using the HTTP (web browser). See Using Web Based

Management (web browser) to change the print/scan settings on page 14.

• For the protocols of security features, see Security protocols on page 47.

DHCP/BOOTP/RARP 1

By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.

Note

To use the DHCP/BOOTP/RARP protocols, please contact your network administrator.

APIPA 1

If you do not assign an IP address manually (using the control panel of the machine or the BRAdmin software)

or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA)

protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.

DNS client 1

The Brother print server supports the Domain Name System (DNS) client function. This function allows the

print server to communicate with other devices by using its DNS name.

LPR/LPD 1

Commonly used printing protocols on a TCP/IP network.

SMTP client 1

Simple Mail Transfer Protocol (SMTP) client is used to send E-mails via Internet or Intranet.

Port9100 1

Another commonly used printing protocol on a TCP/IP network.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 102 103

No comments

Brother MFC-9440CN User Manual Page 14