Brother MFC-J870DW User Manual download pdf (Page 25)

Macintosh

Wired Network

Windows

Macintosh

Wired Network

For Macintosh wired network interface users (MFC-J870DW/J875DW only)

(Mac OS X v10.6.8, 10.7.x, 10.8.x)

Before you install

Make sure your machine is connected to the power

and your Macintosh is ON. You must be logged on

with Administrator rights.

Connect the network

cable

a Lift the scanner cover until it locks securely into

the open position.

b Connect the network cable to the Ethernet port

marked with a symbol a. You will find the

Ethernet port inside the machine, as shown in

the callout below. Remove the protective

cap b before connecting the cable.

c Carefully guide the network cable into the cable

channel and out the back of the machine.

Connect the cable to your network.

NOTE

• For Mac OS X v10.6.0 to 10.6.7 users, upgrade

to Mac OS X v10.6.8 - 10.8.x.

• If you have previously set up your machine for

a wireless network and then want to set it up on

a wired network, make sure the machine’s

Network I/F is set to Wired LAN. The

wireless network interface will become inactive

with this setting.

On your machine, press (Settings).

Press All Settings.

Press a or b to display Network.

Press Network.

Press a or b to display Network I/F.

Press Network I/F.

Press Wired LAN.

Press .

IMPORTANT

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

NOTE

If both the USB and the network cables are being

used, guide both cables through the cable

channel with one on top of the other.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 45 46

Comments to this Manuals

No comments

Brother MFC-J870DW User Manual Page 25

Comments to this Manuals

Related products and manuals for Multifunction Devices Brother MFC-J870DW