Brother DCP-J925DW User's Guide download pdf (Page 64)

Cleaning the paper feed

rollers A

If the paper feed rollers are stained with ink, it

may cause paper feed problems.

a Unplug the machine from the electrical

socket. Pull the paper tray (1)

completely out of the machine.

Note

If the paper support flap is open, close it,

and then close the paper support.

b Clean the front side of the Paper Feed

Rollers (1) with a soft lint-free cloth

slightly moistened with water, using a

side-to-side motion.

After cleaning, wipe the rollers with a

dry, soft lint-free cloth to remove all

moisture.

c Lift the Jam Clear flap (2), and then

clean the back side of the Paper Feed

Rollers (1) with a soft lint-free cloth

slightly moistened with water.

After cleaning, wipe the rollers with a

dry, soft lint-free cloth to remove all

moisture.

d Put the paper tray firmly back in the

machine.

e Re-connect the power cord.

Note

Do not use the machine again until the

rollers are completely dry. Using the

machine before the rollers are dry may

cause paper feed problems.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 75 76

No comments

Brother DCP-J925DW User's Guide Page 64