Brother HL-2150N Setup Guide download pdf (Page 7)

Getting Started

Carton Components

Carton components may vary from one country to another.

Save all packing materials and the printer carton in case for any reason you must ship your printer.

1 Face-down output tray support flap 1 (Support flap 1)

2 Control panel

3 Manual feed paper guide

4 Manual feed slot

5 Manual feed slot cover

6 Paper tray

7 Front cover

8 Power switch

9 Ventilation hole

10 Face-down output tray

The Network interface cable is not standard accessories. Please purchase them, if you intend to use.

 USB cable

• Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters).

• Your printer has a USB interface that is compatible with the USB 2.0 specification. This interface is also

compatible with Hi-Speed USB 2.0; however, maximum data transfer rate will be 12 Mbits/s. The printer can

also be connected to a computer that has a USB 1.1 interface.

• DO NOT connect the interface cable at this time. Connecting the interface cable is done during the printer

driver installation process.

When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB

port on a keyboard or non-powered USB hub.

 Network cable (For HL-2150N users)

• Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast

Ethernet Network.

CD-ROM

(including User’s Guide

and Network User’s Guide)

Quick Setup Guide

Drum unit and toner

cartridge assembly

AC power cord

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

No comments

Brother HL-2150N Setup Guide Page 7