Brother MFC-790CW Setup Guide download pdf (Page 20)

20

Macintosh

®

USB

For USB Interface Users (For Mac OS

®

X 10.2.4 or greater)

23

Before you install

a Make sure your machine is connected to the

power and your Macintosh

®

is ON. You must

be logged on with Administrator rights.

24

Connect the USB cable

a Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

b Connect the USB cable to the USB socket

marked with a symbol. You will find the

USB socket inside the machine on the right as

shown below.

c Carefully route the USB cable through the

trench and out the back of the machine as

shown below and connect the cable to your

Macintosh

®

.

d Lift the scanner cover to release the lock a.

Gently push the scanner cover support

down b and close the scanner cover c.

Important

• For Mac OS

®

X 10.2.0 to 10.2.3 users,

upgrade to Mac OS

®

X 10.2.4 or greater. (For

the latest information for Mac OS

®

X, visit

http://solutions.brother.com/

)

• Make sure there are no memory cards or a

USB Flash memory drive inserted.

Important

• DO NOT connect the machine to a USB port

on a keyboard or a non-powered USB hub.

• Connect the machine directly to your

Macintosh

®

.

Important

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

LAN USB

1

3

2

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Comments to this Manuals

No comments