Brother MFC-790CW Setup Guide download pdf (Page 28)

28

Macintosh

®

Wired Network

For Wired Network Interface Users (For Mac OS

®

X 10.2.4 or greater)

23

Before you install

a Make sure your machine is connected to the

power and your Macintosh

®

is ON. You must

be logged on with Administrator rights.

24

Connect the network

cable

a Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

b Connect the network cable to the LAN socket

marked with a symbol. You will find the

LAN socket inside the machine on the left as

shown below.

Important

• For Mac OS

®

X 10.2.0 to 10.2.3 users,

upgrade to Mac OS

®

X 10.2.4 or greater. (For

the latest information for Mac OS

®

X, visit

http://solutions.brother.com/

)

• Make sure there are no memory cards or a

USB Flash memory drive inserted.

• If you have previously set up your machine

for a wireless network and then want to set

it up on a wired network, you should check

that the machine’s Network I/F is set to

Wired LAN. The wireless network interface

will be inactive with this setting. On your

machine, press MENU.

Press a or b to display Network and press

Network.

Press Network I/F.

Press Wired LAN.

Press Stop/Exit.

LAN USB

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 49 50

Comments to this Manuals

No comments