Brother DCP-117C User Manual download pdf (Page 8)

Setting Up the Machine

STEP1

3 If your language is chosen, press a (Yes).

If you have set the language wrongly, you

can change the language after setting the

date and time. (For details, see "How to

change LCD language" in Chapter 5 of the

User's Guide)

6 Installing the ink cartridges

Warning

If ink gets in your eyes, wash them out with water

at once, and if irritation occurs consult a doctor.

1 Make sure that the power is turned on.

The LCD shows:

No Cartridge

2 Lift the scanner cover (1) from the right-hand

side of the machine until it locks securely into

the open position.

3 Remove the protective parts (1).

Note

Do not throw away the protective parts. You will

need them if you transport the machine.

4 Take out the ink cartridge.

5 Carefully remove the protective yellow cap (1).

Improper Setup

DO NOT touch the area shown in the

illustration below.

Note

If the protective yellow cap comes off when you

open the bag, the cartridge will not be damaged.

Keep the ink cartridge in an upright position

when you put it into the slot.

OKOK

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

No comments

Brother DCP-117C User Manual Page 8