Brother DCP-350C User Manual download pdf (Page 20)

Installing the Driver & Software

STEP 2

Windows

Network

For Network Interface Users (DCP-560CN only)

(For Windows

2000 Professional/XP/

XP Professional x64 Edition/Windows Vista™)

Important

Make sure that you have finished the

instructions from STEP 1 Setting Up the

Machine on pages 4 through 11.

Note

• The supplied CD-ROM includes ScanSoft™

PaperPort™ 11SE. This software supports

Windows

2000 (SP4 or greater), XP (SP2 or

greater), XP Professional x64 Edition and

Windows Vista™ only. Please update to the latest

Windows

Service Pack before installing MFL-Pro

Suite.

• Please close any applications running before

installing MFL-Pro Suite.

• Make sure there are no memory cards or a USB

Flash memory drive inserted into the media drives

or USB direct interface at the front of the machine.

1 Unplug the machine from the AC outlet.

2 Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

3 Insert the network cable into the LAN socket

marked with a symbol. You will find the

LAN socket inside the machine on the left as

shown below.

4 Carefully route the network cable through the

trench and out the back of the machine as

shown below.

Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide

both cables through the trench with one on top of

the other.

5 Lift the scanner cover to release the lock .

Gently push the scanner cover support

down and close the scanner cover .

6 Turn on the machine by connecting the power

cord.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Comments to this Manuals

No comments

Brother DCP-350C User Manual Page 20

Comments to this Manuals

Related products and manuals for Printers Brother DCP-350C