Brother DCP 8060 User Manual download pdf (Page 64)

The machine prints unexpectedly

or it prints garbage.

 Turn off the machine’s power switch and then turn it on again. If the error

message continues leave the machine for several minutes and then try it

again.

 Check the settings in your application to make sure it is set up to work with

your machine.

 If you are using the parallel port connection, check that the port is BRMFC and

not LPT1.

The machine prints the first couple

of pages correctly, then some

pages have text missing.

 Check the settings in your application to make sure that it is set up to work with

your machine.

 Your computer is not recognizing the machine’s input buffer’s full signal. Make

sure that you connected the interface cable correctly. (See the Quick Setup

Guide.)

The machine cannot print full

pages of a document.

Out of Memory message

appears.

 Reduce the printing resolution. (See Advanced tab in the Software User’s

Guide on the CD-ROM.)

 Reduce the complexity of your document and try again. Reduce the graphic

quality or the number of font sizes within your application.

 Add more memory. See Installing extra memory on page 50.

The headers or footers appear

when the document displays on the

screen but they do not show up

when it is printed.

There is an unprintable area on the top and bottom of the page. Adjust the top and

bottom margins in your document to allow for this.

The machine does not print on both

sides of the paper even though the

printer driver setting is Duplex.

(DCP-8065DN only)

Check the paper size setting in the printer driver. You need to select either A4,

Letter, Legal or Folio.

The machine is not printing or has

stopped printing and the machine’s

status LED is yellow.

Press Job Cancel. As the machine cancels the job and clears it from the memory

it may produce an incomplete printout. Try to print again.

Scanning Difficulties

Difficulties Suggestions

TWAIN errors appear while

scanning.

Make sure that the Brother TWAIN driver is chosen as the primary source. In

PaperPort

, click File, Scan and choose the Brother TWAIN driver.

Software Difficulties

Difficulties Suggestions

Cannot install software or print. Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair

and reinstall the software.

Cannot perform ‘2 in 1’ or ‘4 in 1’

printing.

Check that the paper size setting in the application and in the printer driver are the

same.

The machine does not print from

Adobe Illustrator.

Try to reduce the print resolution. (See Advanced tab in the Software User’s Guide

on the CD-ROM.)

When using ATM fonts, some

characters are missing or wrong

characters are printed in their

place.

If you are using Windows

98/98SE/Me, click Start, Settings, and then Printers.

Right-click Brother DCP-XXXX (where XXXX is your model name) and click

Properties. Click Spool Setting on the Details tab. Choose RAW from Spool

Data Format.

Printing Difficulties (Continued)

Difficulties Suggestions

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 115 116

Comments to this Manuals

No comments

Brother DCP 8060 User Manual Page 64

Comments to this Manuals

Related products and manuals for Printers Brother DCP 8060