Brother HL-1870N User Manual download pdf (Page 27)

CHAPTER 1 UNIX PRINTING

1-11

DEC TCP/IP Servers for VMS(UCX)

You need to run the sys$system:ucx:$lprsetup command, specify a

printer name, and then enter the print server IP address as the remote system

name. Specify one of the print server services (see beginning of this section for

options) as the remote system printer name (accept the defaults for other

questions).

TGV's Multinet

TGV's Multinet requires you to run the MULTINET CONFIGURE /PRINTERS

command, then use the ADD command to add a printer, specifying the print

server IP address, a protocol type of LPD, and one of the service options

described at the beginning of this chapter as the remote print queue.

Wollongong's PATHWAY

First make sure that you have the Access option with lpd enabled. Then enter the

print server name and IP address in the TWG$TCP:[NETDIST.ETC]HOSTS

file, run the LPGEN program, and execute the command: add

queue/rmachine=prnservername/rprinter=prnserverservice,

where queue is the name of the queue, prnservername is the print server

name from the hosts file, and prnserverservice is the print server service

name.

IBM AS/400

To use a Brother print server with an IBM AS/400 running IBM’s TCP/IP

gateways services for OS/400 (the OS/400 system must be v3.1 or later)

Use the CFGTCP command at your OS/400 prompt to add the print server’s

TCP/IP address to the AS/400 host table.

Use the following one-line OS/400 command to create the LPD queue:

CRTOUTQ OUTQ(<queuename> RMSTSYS

(*INTNETADR) RMTPRTQ(<service>)

AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE (*OTHER)

MFRTYPMDL (<driver>)

INTNETADR(‘<ipaddress>’) TEXT

(‘<description>’)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 148 149

No comments

Brother HL-1870N User Manual Page 27