Brother HL-7050N User Manual download pdf (Page 103)

8 - 4 DLC PRINTING

YL4US_FAX2800MFC4800-FM5.5

Windows

NT 4.0 Printer Setup

Log into Windows

NT with administrative privileges. From the Start

menu, select Settings and then Printers.

Select

Add Printer

(If you have already installed a Brother printer

driver, double click the printer driver that you wish to configure and

then select

Printers/Properties

, select the

Ports

tab and

continue from Step 4 (ignoring steps 9-11 about installing the

correct driver)).

Select My Computer and then click Next.

Select Add a Port.

Select Hewlett-Packard Network Port and then click New

Port.

A list of available print server MAC addresses (Ethernet

addresses) appears in the larger box under Card Address.

Select the address of the desired print server (you can see the

Ethernet address on the printer configuration page).

The selected print server address will then appear in the smaller

box under Card Address.

Type in any desired name for the port (the name must not be the

name of an existing port or DOS device, such as LPT1) and click

OK then on the Printer Ports screen, click Close.

The name you selected in the above step will appear as a

checked port in the list of available ports. Click Next.

Select the correct driver. Click Next.

Give a name to the printer. If desired, select the printer as the default.

Select Shared or Not Shared. If shared, specify the share

You can find the node name and MAC address by printing out the

printer configuration page. Refer to the

Quick Setup

Guide for

information on how to print the configuration page on your print

server.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 163 164

No comments

Brother HL-7050N User Manual Page 103