Brother MFC 9840CDW User Manual download pdf (Page 26)

Installing the Driver & Software

STEP 2

Windows

Wireless

Network

Using the SecureEasySetup™ software to configure your machine for a

wireless network

The SecureEasySetup™ software allows you to

configure the wireless network easier than

configuring it manually. By pushing a button on the

wireless router or access point, you can setup the

wireless network and security settings. Your router or

access point must also support SecureEasySetup™.

See the user’s guide for your wireless LAN router or

access point for instructions to configure your

machine for a wireless network. If your wireless router

or access point does not support SecureEasySetup™

go to the next page for installation instructions.

Note

Routers or access points that support

SecureEasySetup™ have the

SecureEasySetup™ symbol as shown below.

1 Plug the AC power cord into an AC outlet. Turn

the power switch on.

Improper Setup

If you have previously configured the wireless

settings of the machine you must reset the

network (LAN) settings before you can

configure the wireless settings again.

Press Menu, 7, 2, 5 (or Menu, 7, 0) and then

press 1 to accept the change.

2 Place the Brother machine close to the

SecureEasySetup™ router or access point .

3 Push the SecureEasySetup™ button on your

wireless router or access point. See the user’s

guide for your wireless router or access point

for instructions.

4 Press Menu, 7, 2, 3 on the control panel of the

Brother machine.

72.WLAN

WLAN Enable ?

a On

b Off

Select ab or OK

Press or to choose On, then press OK.

The wired network interface will become

inactive with this setting.

5 The wireless network connection status using

the SecureEasySetup™ software will be

displayed: Connecting WLAN, Connected

or Connection NG.

Connecting WLAN is displayed when the

print server is trying to make connections to

your router or access point. Wait till either

Connected or Connection NG is displayed.

Connected is displayed when the print server

is successfully connected to your router or

access point. You can now use your machine

in a wireless network.

Connection NG is displayed when the print

server has not successfully connected to your

router or access point. Try starting from step 2

again. If the same message is displayed again,

reset the print server back to the default factory

settings and try again. (See Restoring the

network settings to factory default on page 47.)

Wireless setup is now complete. To install

the MFL-Pro suite, continue to step 14 on

page 27.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 52 53

Comments to this Manuals

No comments

Brother MFC 9840CDW User Manual Page 26

Comments to this Manuals

Related products and manuals for Printers Brother MFC 9840CDW