Brother RJ-4030 User Manual download pdf (Page 13)

P-touch Template 2.0 Command Reference

- 7 -

2. P-touch Template Settings Tool User’s Guide

(12) FNC1 replacement setting

This setting selects whether or not GS codes, which are included in barcode protocols such as

GS1-128 (UCC/EAN-128), are replaced with FNC1 codes.

If the check box is selected, a received GS code is replaced with the FNC1 code. If the check box is

cleared, a received GS code is outputted as is.

(13) Number of copies setting

Specify the number of copies. A number between 1 and 99 can be specified.

(14) Print quality setting

Select the print quality setting. If the check box is selected, priority is given to the print quality. If the

check box is cleared, priority is given to the print speed.

(15) Communication settings

Settings can be specified for the following parameters for serial communication.

Baud rate

115200 bps, 57600 bps, 38400 bps, 31250 bps, 28800 bps, 19200 bps,

14400 bps, 9600 bps, 4800 bps, 2400 bps, 1200 bps, 600 bps

Bit length (bits) 8 bits, 7 bits

Parity None, Odd, Even

Busy control DTR, XON/XOFF

Applies the four settings

to the

rinter.

Returns the four parameters

to their default settings.

Closes the Communication

Settings dialog box.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 109 110

No comments

Brother RJ-4030 User Manual Page 13