Brother TD-2020 User Manual download pdf (Page 5)

3

EN

Power cord/AC adapter

Use only the authorized AC adapter

(120VAC) and power cord that came

supplied with the printer.

Using any other AC adapter and power cord

may result in a fire, electric shock or

damage.

Do not insert foreign objects into the

terminals of the AC adapter, otherwise burns

or electric shock may result.

Do not touch the AC adapter, or the power

plug with wet hands, otherwise electric

shock may result.

Do not allow organic solvents, such as

benzene, thinner, polish remover, or

deodorizers, to come into contact with the

AC adapter or the cables. These may cause

the AC adapter or the cables to warp or

dissolve, resulting in electric shock or fire.

Keep out of the reach of children, particularly

infants, otherwise injuries may result.

Do not overload electric outlets or plug

multiple devices into the same electrical

outlet. There is a risk of fire, electric shock,

and damage.

Do not try to disassemble, alter, or repair the

AC adapter, otherwise fire, electric shock, or

injury may result.

Contact Brother customer service for printer

service or repairs (the warranty does not

cover damage resulting from disassembly or

alternations performed by the user.)

Use the AC adapter and the cables correctly

and observe the following precautions,

otherwise fire or electric shock may result.

• Do not damage the AC adapter.

• Do not modify the AC adapter.

• Do not twist the AC adapter.

• Do not severely bend the AC adapter.

• Do not pull on the AC adapter.

• Do not place objects on the AC

adapter.

• Do not subject the AC adapter to heat.

• Do not bind the AC adapter.

• Do not allow the AC adapter to be

pinched.

Do not spill liquids of any type on the printer.

Fire, electric shock, or damage may result.

Do not use the AC adapter near flames or

heaters. If the covering of the AC adapter or

the cables melts, fire or electric shock may

result.

Regularly remove the power plug from the

electrical outlet, and clean the base of the

prongs and between the prongs. If you leave

the power plug in the electrical outlet for an

extended period of time, dust will

accumulate at the base of the power plug

prongs. This could cause a short circuit that

may result in a fire.

Ensure the power plug cord is correctly

inserted into the electrical outlet. There is a

risk of fire, electric shock, or damage.

When disconnecting the power cord from the

electrical outlet, do not pull on the cord. Hold

the power plug and pull it out of the electrical

outlet. There is a risk of fire, electric shock,

or damage.

Do not use damaged plugs or bent electrical

outlet. There is a risk of fire, electric shock,

and damage.

Brother strongly recommends that you DO

NOT use any extension cord.

When connecting cables and accessories,

make sure they’re connected correctly and

in the correct order. Only connect items that

are designed specifically for this printer.

There is a risk of fire or injury. Refer to the

instructions when connecting.

WARNING

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments