Brother MFC-8510DN User Manual download pdf (Page 9)

Configuration for Scan to Network using a Web Browser

Synchronize with SNTP server 2

You must configure the SNTP protocol (network time server), or you must set the date, time and time zone

correctly on the control panel for Kerberos Authentication. The time must match the time used by the

Kerberos Server.

SNTP is the protocol used to synchronize the time used by the machine for Authentication with the SNTP

time server (this time is not the time displayed on the LCD of the machine). You can synchronize the time

used by the machine on a regular basis with the Coordinated Universal Time (UTC) provided by the SNTP

time server.

Note

This function is not available in some countries.

a Start your web browser.

b Type “http://machine’s IP address/” into your browser's address bar (where “machine’s IP address” is the

IP address of the machine or the print server name).

 For example: http://192.168.1.2/

c No password is required by default. If you have previously set a password, enter it and press .

d Click Network, and then click Protocol.

e Select the SNTP check box to activate the setting.

f Click Advanced Setting.

 Status

Displays whether the SNTP server settings are enabled or disabled.

 SNTP Server Method

Choose AUTO or STATIC.

• AUTO

If you have a DHCP server on your network, the SNTP server will automatically obtain the address

from that server.

• STATIC

Enter the address you want to use.

 Primary SNTP Server Address, Secondary SNTP Server Address

Enter the server address (up to 64 characters).

The Secondary SNTP server address is used as a backup to the Primary SNTP server address. If the

Primary server is unavailable, the machine will contact the Secondary SNTP server. If you have a

Primary SNTP server, but no Secondary SNTP server, simply leave this field blank.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

No comments

Brother MFC-8510DN User Manual Page 9