Brother MFC-5890CN User's Guide download pdf (Page 184)

168

d Turn the green knob on the protective

yellow cap clockwise until clicks to

release the vaccum seal, then remove

the cap (1).

e Each color has its own correct position.

Insert the ink cartridge in the direction of

the arrow on the label.

f Gently push the ink cartridge in until it

clicks, and then close the ink cartridge

cover.

g The machine will automatically reset the

ink dot counter.

Note

• If you replaced an ink cartridge, for

example Black, the LCD may ask you to

verify that it was a brand new one (for

example, Did You Change Black).

For each new cartridge you installed,

press 1 (Yes) to automatically reset the

ink dot counter for that color. If the ink

cartridge you installed is not a brand new

one, be sure to press 2 (No).

• If the LCD shows No Cartridge or

Cannot Detect after you install the ink

cartridges, check that the ink cartridges

are installed properly.

WARNING

If ink gets in your eyes, wash them out with

water at once and call a doctor if you are

concerned.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 246 247

No comments

Brother MFC-5890CN User's Guide Page 184