Brother HE1 Instruction Manual download pdf (Page 80)

Basic Stitching 79

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Start sewing.

• For details, refer to "Starting to sew" (page

51).

• For details on sewing reverse/reinforcement

stitches, refer to "Securing the stitching" (page

53).

When sewing is finished, cut the thread.

• For details, refer to "Cutting the thread" (page

54).

■ Changing the needle position

The needle position used as the baseline is

different for the straight stitch (left needle

position) and the straight stitch (center needle

position).

a Straight stitch (left needle position)

b Straight stitch (center needle position)

When the stitch width of the straight stitch (left

needle position) is set to its standard setting

(0.0 mm), the distance from the needle position to

the right side of the presser foot is 12 mm

(1/2 inch). If the stitch width is changed (between

0 and 7.0 mm (1/4 inch)), the needle position will

also change. By changing the stitch width and

sewing with the right side of the presser foot

aligned with the edge of the fabric, a seam

allowance can be sewn with a fixed width.

a Stitch width setting

b Distance from the needle position to the right side

of the presser foot

c 12.0 mm (1/2 inch)

d 10.0 mm (3/8 inch)

e 6.5 mm (1/4 inch)

f 5.0 mm (3/16 inch)

• For details, refer to "Adjusting the stitch

width" (page 56).

0.0 2.0 5.5 7.0

34 5

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 180 181

No comments

Brother HE1 Instruction Manual Page 80